3M Fiber Optic
test set
Fiber optic test measurement set,
consists of optical power meter and digital variable optical attenuator.
Connector type : FC
HP 4387B Power Meter
High performance, single-channel,
programmable. Depending on which Power Sensor is used, it can measure from
-70dBm to +44dBm at frequencies from 100 KHz to 50GHz
WG Fiber Optic
test set
Fiber optic test measurement set, consists of optical power meter,
optical source and digital variable optical attenuator.
Connector type : DIN or FC
WG - RMS/RME-5
Microwave Link Analyzer
RMS and RME-5 is 70Mhz IF group delay measurement.
Digital Storage Oscilloscope
100 Mhz bandwidth, dual channel Digital Storage Oscilloscope, auto and external trigger.
Fmi 14110
Wave guide variable attenuator
Precision rotary attenuator
0-60 dB Freq range : 5.38 to 8.18 GHz, necessary for fade margin or
threshold measurement of a digital microwave link
HP
5432A Microwave Counter
Freq range : 10Hz to 18Ghz
Fully automatic frequency measurement with 1 Hz resolution, provided 2
different inputs 10Hz to 500Mhz with BNC, and N connector for higher
frequency
